The Amsco Reliance 444 Single-Chamber Washer/Disinfector is a mechanical washer equipped with an Eagle 3000 Stage 3™ control system. The washer is designed with six (6) adjustable cycles:

• Instruments
• Gentle
• Utensils
• Glassware
• Plastic goods
• Rubber goods

Four (4) additional cycles are available for customized programming.

Each pre-programmed cycle is equipped with:

• Pre-wash
• Wash
• Rinse
• Thermal rinse

The washer is built to seismic design and offers a vented or non-vented system.

Reliance® 333 Washer/Disinfector

For automated cleaning, thermal disinfection, and drying of reusable general surgical instruments prior to sterilization in outpatient/same-day surgery departments, surgical centers, and ambulatory care centers. A wide variety of surgical instrumentation and containers may safely be processed in the Amsco Reliance 333 including: reusable, general surgical instruments, minimally invasive surgery (MIS) rigid instruments, and microsurgical instruments.

The Reliance 333 Washer/Disinfector is a single-door, counter height washer/disinfector, designed for installation under-counter or as a freestanding unit (with accessory panels).

The standard pull-down door facilitates loading of the unit. An optional load lifting door is available to adjust the door height to countertop level for ergonomic ease of loading or unloading. The washer/disinfector features state-of-the-art microcomputer control, with user-friendly operator interface.

A printer can be installed to record and monitor cycles and cycle parameters.

The Reliance 333 is pre-programmed with the following applications:

• Cold water pre-wash
• Enzyme wash utilizing a pulsed spraying pattern for effective protein removal
• Neutral detergent wash with bi-directional spray arms on top and bottom of each load level
• Thorough rinsing of instruments
• Guaranteed thermal disinfection rinse at minimum 180° F for 1 minute
• Instrument lubricant added during thermal rinse
• HEPA Filter drying of complete load

These applications are pre-programmed into three cycles (Instrument 1, Micro Instrument 2, MIS 3) and are fully selective in three additional cycles (Cycle 4, Cycle 5, Cycle 6).

All six pre-programmed cycles have minimal factory-set values, to ensure cleaning and guarantee low-level disinfection of loads.

Hamo® LS-950 Washer/Disinfector
Automatic Washer for Cleaning, Decontamination and Drying.

Applications:

The Hamo LS-950 was developed specifically for hospitals, to be used in the central sterilization department. The washer and accessories are designed for cleaning:

• Instruments
• MIS instruments
• Glassware
• Container
• AN-tubes
• OP-shoes
• Baby bottles

Wash chamber:
19.69" X 20.87" X 20.87" (W/H/D)

The economical machine for cleaning, disinfecting in the central sterilisation department.

Hamo® LS-2000 Washer/Disinfector
Automatic Washer for Cleaning, Disinfecting and Drying.

Applications:

The Hamo LS-2000 was developed specifically for hospitals, to be used in the central sterilization department, ASC, or in the OR Reprocessing area. The washer and accessories are designed for cleaning the following parts:

• Instruments
• Glassware
• Minimal invasive instruments
• AN-tubes
• OP-shoes

Wash chamber:
19.69" x 24.80" x 24.41" (W/H/D)

AMSCO Reliance tabletop Sonic Cleaners

Small, efficient, space saving tabletop sonic cleaners with digital control and display for process timing and temperature control.

Available in 4 different sizes from 2.8 to 21 Litres.

Amsco® Sonic Energy Console

The Amsco® Sonic Energy Console is used for cleaning surgical instruments by sonic vibrations passed through detergent laden wash water and following the sonic cleaning process, thoroughly rinsing and drying the instruments. Cleaning and rinsing/drying chambers are positioned for either right-to-left or left-to-right workflow.

Amsco® Sonic Energy Cleaner

The Amsco® Sonic Energy Cleaner is a compact cabinet designed to effectively clean surgical instruments by sonic vibrations passed through detergent-laden wash water.

Introducing the Reliance™ EPS Endoscope Processing System. Taking high level disinfection (HLD) to the NEXT step in safety for your GI Department.

Finally, a safe and efficient alternative to commonly-used high level disinfection (HLD) solutions and processors.

Safe for your staff
Safe for your patients
Safe and efficient for your GI Department

The Reliance™ EPS Endoscope Processing System and the Reliance™ DG oxidizing chemistry offer a safe alternative to aldehydes in a validated system designed specifically for use in the GI Department.

Automated thermal and chemical self-decontamination cycles help prevent biofilm from forming in the processor

Safely accelerates throughput with an easy-to-load, virtually connector-less dual scope automated processor

Device compatibility testing program has verified process compatibility with endoscopes
Reliance DG formulation contains buffers, anticorrosives and chelators to make it safe for use with delicate and expensive flexible endoscopes

Unique “blue boot” design virtually eliminates need for connectors, helping to improve department efficiency

Compatible with a majority of popular flexible GI endoscopes

Processes one or two scopes at once within 30 minutes for high throughput.

The Hamo LS-950 Endoclean is a single-chamber washer/disinfector designed to clean, high-level disinfect, and dry flexible endoscopes and their accessories.

The Hamo LS-950 Endoclean is a mechanical washer/disinfector equipped with an Infra-Control control system. The Infra-Control is designed to store up to 99 Washing Programs, each containing up to 50 different cycles.
The LS-950 washer/disinfector provides low-temperature chemical disinfection of flexible endoscopes using a dosed high-level disinfectant in a cycle that never exceeds 60°C (140°F).

The Reliance 130 Cart and Utensil Washer / Disinfector is a high capacity mechanical washer intended for use in the efficient washing, low-level disinfecting, and drying of carts, utensils, beds and other miscellaneous reusable items used in the care of patients.

The Reliance 200 and 250 Glassware Washers are high-quality, high performance systems specifically designed and validated for research-intensive laboratory settings. As point-of-use systems, these washers offer automated cleaning and drying of typical laboratory glassware, as well as miscellaneous plastic items used in universities, biotech, biopharmaceutical, and pharmaceutical analytical and quality control laboratories.

The Reliance 400 Laboratory Glassware Washer is manufactured in a production facility that is ISO 13485 certified, are designed for high-capacity, efficient cleaning of laboratory glassware. From our first washing and drying systems produced more than 30 years ago to today's Model 400 glassware washer, performance has always been superior.

Hamo® T-21 Glassware Washer
Cleaning and Drying System

Wash chamber:
T-21: 640 x 640 x 640 mm ( 25¼ x 25¼ x 25¼ inches)
and 640 x 1000 x 640 mm ( 25¼ x 39¼ x 25¼ inches) (WxHxD)

The economical system for cleaning and drying of laboratory glassware.

Most Frequent Applications:

The Hamo T-21 Glassware Washer was developed specifically for the high demands of research laboratories. The machine is designed for cleaning the following parts:
Glassware
Drums and containers
Machine parts

Details:
Extensive variants of equipment

• Single or double door machine with vertical sliding doors
• Tank-independent rinsing
• Monitoring of temperature and conductivity
• Rotation of the wash load
• Use of hollow jets with contact coupler to the basket
• High capacity HEPA filtered drying system
• Ex-protection construction
• Barcode reader
• Wide variety of standard and custom designed baskets
• Extensive automation and conveyors

User-friendly control concept

• Microprocessor Infracontrol with Editor on external PC
• RS 232 Interface for SCADA

Real-time process-documentation

• System for documentation of process data visualization (PDVS)
• Data availability on printer, network, and data mediums

Hamo® T-420 Glassware Washer
Cleaning and Drying System

Wash chamber:

1290 x 700 x 800 mm (50¾ x 27½ x 31½ inches) and
1290 x 1000 x 800 mm (50¾ x 39¼ x 31½ inches)(WxHxD)

The economical system for cleaning and drying of laboratory items.

Most Frequent Applications:

The Hamo T-420 was developed specifically for the high demands of research laboratories. The machine is designed for cleaning the following parts:

• Glassware
• Drums and containers
• Machine parts

Details:
Extensive variants of equipment

• Single or double door machine
• Tank-independent rinsing
• Monitoring of temperature and conductivity
• Rotation of the wash load
• Use of hollow jets with contact coupler to the basket
• High capacity HEPA filtered drying system
• Ex-protection construction
• Barcode reader
• Wide variety of standard and custom designed baskets
• Extensive automation and conveyors

User-friendly control concept

• Microprocess control Infracontrol with Editor on external PC
• RS 232 Interface for SCADA

Real-time process-documentation

• System for documentation of process data visualization (PDVS)
• Data availability on printer, network, and data mediums

Ecoline® LM-25 Glassware Washer

Thermal Disinfector for Instruments and Glassware.

Wash chamber:
550/570/500 mm (22.0/22.0/20.0 inches) (W/H/D).

Professional cleaning and disinfecting.

Most Frequent Applications:

The Ecoline LM-25 was developed specifically for the high demands of research laboratories. The machine is designed for cleaning the following parts:

• instruments
• glassware

Details Construction:

• Chamber is fabricated in stainless steel 316 with rounded corners
• Single door machine
• Double skin
• Built-in steam condenser
• Triple water filtering system
• Easy access to all components
• Various disinfecting programs
• Two dosing pumps as standard
• LC-display
• User-friendly control concept
• Microprocessor including RS 232 port

The ideal solution for efficient washing and disinfection of bedpans and urinals.
User friendly, reliable and operational solution with a high hygienic level.
Front operated, front loading and unloading.
Provides efficient cleaning and thermal disinfection through different cycles configurations.
space saver with a relatively small footprint.
Available as stand alone or under-counter units.

VHP® 1000ED Biodecontamination System
Extended Duty/Enhanced Design

The standard in low temperature sterilization that you've depended on for the past fifteen years is now even more efficient. VHP 1000ED offers extended duty to maximize production efficiency and enhanced design for improved, more robust operation.

• For low temperature sterilization of isolators, workstations, filling lines, rooms, etc. in research, biological safety, and production applications

• Select from new control options; expanded feature touch-screen control which can be interfaced with a PLC, or Siemens, or Allen-Bradley PLC

• Unit is mobile for multiple site low temperature sterilization

The VHP cycle operates in a closed-loop configuration where the enclosure is subjected to four phases:

• Dehumidification - Reduction of relative humidity
• Condition - Rapid increase to desired hydrogen peroxide vapor concentration
• Biodecontamination - Maintenance of desired hydrogen peroxide vapor concentration
• Aeration - Rapid reduction of hydrogen peroxide vapor

Cycle times vary with initial temperature and humidity; enclosure type, size and configuration; and load.

The process is fully automated. All cycle parameters are monitored and recorded for process validation.

Products Available for Equipment Operation / Validation:

• Vaprox® 35% Hydrogen Peroxide Sterilant
• Formulated to provide optimum equipment performance
• Cartridge is specially designed for fast, easy installation
• VHP Chemical Indicators retain color change for proof of exposure
• Spordex® VHP Biological Indicators ensure reliable process validation

VHP Training, Technical Support and Service:

• Full operator training is provided either on-site or at a STERIS training facility.
• Application Engineers are available to assist with custom cycle development and validation.
• Field Service Engineers are available to assist with IQ/OQ, calibration, start-up, and preventative maintenance.

VHP® 100P Biodecontamination System
The proven technology of VHP low temperature sterilization is now available for small enclosures of 2 to 70 cubic feet (0.05 to 2 cubic meters) including small isolators, biological safety cabinets, glove boxes, CO2 incubators and small pass-through chambers.

• Portable unit ideal for multiple site low temperature sterilization
• 316L stainless steel construction
• Ergonomically designed for maximum operator comfort and safety
• Operator friendly touch-pad control with printer
• Reusable or disposable air drying systems permit continuous operation and rigid humidity control for easy validation

The VHP cycle operates in a closed-loop configuration where the enclosure is subjected to four phases:

• Dehumidification - Reduction of relative humidity
• Condition - Rapid increase to desired hydrogen peroxide vapor concentration
• Biodecontamination - Maintenance of desired hydrogen peroxide vapor concentration
• Aeration - Rapid reduction of hydrogen peroxide vapor.

Cycle times vary with initial temperature and humidity; enclosure type, size and configuration; and load.

The process is fully automated. All cycle parameters are monitored and recorded for process validation.

Products Available for Equipment Operation / Validation:

• Vaprox® 35% Hydrogen Peroxide Sterilant
• Formulated to provide optimum equipment performance
• Cartridge is specially designed for fast, easy installation
• VHP Chemical Indicators retain color change for proof of exposure
• Spordex® VHP Biological Indicators ensure reliable process validation

VHP Training, Technical Support and Service:

• Full operator training is provided either on-site or at a STERIS training facility.
• Application Engineers are available to assist with custom cycle development and validation.
• Field Service Engineers are available to assist with IQ/OQ, calibration, start-up, and preventative maintenance.